Be sure to thoroughly clean the position that needs to be pasted before pasting; remove the adhesive tape on the reverse side of the mark and align it with the position. It is best to use a hair dryer to slightly heat the double-sided tape on the back side for the best adhesion; long press for a period of time after the paste to ensure firmness; do not wash the car within three days of installation. Remember; there should be no moisture before and after pasting.
1. The product itself has a slight curvature, can be used for the steering wheel mark, the cover label, and the back mark. Please don’t judge the size because it is not suitable for the size. The size has been clearly stated. This is a universal model, directly attached to you. Which size is suitable for the car?
2. Before cleaning, first clean the place to be affixed, use alcohol with conditions, use detergent after no condition, tighten tightly after sticking, do not touch the water within 2 days, then it is very firm.
3. The product will not fade, and the back is metal.
Zinc alloy material, texture is very good ~~